This sleek silver Zodiac is powered by a 25 jewel variation of Zodiac’s 1960s workhorse 70-72 movement. It has a somewhat unusual (for the time period) monoblock case (solid back) case, with a split stem to allow insertion and removal of the movement through the front of the case.

The Zodiac Sea Wolf was one of the first vintage watches that really spoke to me. I had seen other examples and decided I really wanted one of my own, and fortunately I was able to find this one in reasonable condition for a restoration - actually one of the first restorations I undertook after cutting my teeth as a watchmaker. The Sea Wolf comes with a stainless steel case, but the bezel is plated, and unfortunately it was in pretty rough shape when I aquired it. I ended up re-plating it in rhodium, which is attractive but also gives the watch a slightly different, more formal look than when it was new. The markings on the bezel were also restored (imperfectly) with the help of some epoxy paint. It is powered by the famous Zodiac 70-72 automatic movement, which is based on a manual wind A. Schild design.

Triple calendar with moon phase is one of my favorite complications, and I didn’t have to think very hard about purchasing this Zodiac when it showed up as a “For Repair” listing. It badly needed a service, and the case had some cosmetic issues that were mostly addressed by over-plating with 14K gold plate. That plus a new crystal, and the end result is really something special. The movement is essentially a reliable and accurate Zodiac 70-72 automatic with the extra calendar bits added to the dial side. Four small pushers make it relatively easy to set the various calendar functions.

I’m a big fan of Zodiac as a high quality but accessible vintage brand. This is a rather basic example, but is still a very handsome vintage watch. The A. Schild-sourced Zodiac 61 movement is a manual-wind-only design that forms the basis of the famous Zodiac 70-72 automatic line.

I have tremendous respect for Zenith as a watchmaker, and good restoration candidates don’t pop up on eBay that often, so I was pleased to find this one. The movement in this thing did not disappoint - it’s beautifully made. This is definitely a cut above the usual watches they used to hand out on service anniversaries. W.H. Rogers must have done a really good job.

So, what do when you have a vintage Wittnauer with a fabulous dial but a broken lug, and another with a good case but an ugly, damaged dial? You make a marriage watch! In this case the marriage is pretty incestuous, as the dial/movement and case are both from contemporaneous Wittnauers. Fitment wasn’t that difficult, but did require a thin 3D printed spacer around the perimeter of the dial, which is barely visible in the assembled watch. I also needed to install new hands, since the original minute hand had been badly bent. I’m pretty happy with the result and glad I could preserve this cool guilloché dial, even if it gets points off for historical accuracy.

The very bold and and very gold style of this chronograph kinda screams 1970s, but regardless of what you think of the exterior, inside sits one of the all time great movements - the Valjoux 236. This uses a column wheel for smooth operation, and has a high 21,600 bph beat rate for accuracy. Interestingly, unlike many other chronographs, the hammer in this movement only makes momentary contact with the register cams when the reset pusher is pressed. A separate brake is used to fix the central chronograph second hand. This was likely done to enable engineering of a flyback variation, the Valjoux 235.

Leave it to Universal Genève to make a microrotor movement that, somewhat in contrast to the Buren microrotor in my Hamilton 688, is genuinely well designed and engineered (and pretty to look at, with Geneva striping across the entire movement). It still has the usual microrotor efficiency issues, but the hand winding mechanism is so solid that it hardly matters. It’s too bad the dial on this watch was subjected to an overly aggressive attempt at cleaning and tritium dot removal, but it still looks good in person - better than the photos.

I tend to be pretty picky about dial condition when I’m shopping for parts and repair watches to restore. This one has a bit more patina than I’m used to, but I wasn’t about to pass up a good deal on a Universal bumper auto, and I have to admit that the somewhat weathered dial looks pretty good sitting in a polished case under a new crystal. The movement, as expected of Universal Genève, is really well made and was a breeze to service.

You can see the distinct aesthetic of modern Tissot watches start to take shape already in this Seastar from the early 1960s, although the contrasting gold hands/indices and steel case is definitely a classic look. One oddity about this watch is that the Tissot 784 movement has no quickset at all for the calendar - not even a unidirectional calendar driving wheel - so setting the date can be a pain. I usually don’t bother when I wear this one.

Classic Tissot watches tended to be very “fashion forward” and they always seem to look particularly modern relative to their actual age. That’s certainly true of this example, with its high-contrast white on black dial. It’s possible, in fact, that this is a re-dial, although it’s difficult to be sure. Regardless, it’s a great looking watch. The Tissot 27-3 movement has an unusual early shock protection design, with the balance cap jewel mounted in a housing that is attached to the balance cock from below by a pair of screws that have polished tips for better aesthetics. The movement ring for this watch was missing, so I 3D printed a replacement.

The wrist watch revolution started when so-called trench watches became popular with soldiers during WW1. Initially, these were basically small pocket watch movements strapped to the wrist, and this Tavannes example, with a porcelian dial and hinged caseback, certainly fits that bill. I wish I knew a bit more about this watch - the movement is unfortunately unmarked - but I treasure it as the real “granddaddy” of my wristwatch collection.

This is probably my favorite vintage chronograph in my collection for everyday wear. The pictures don’t completely do it justice, but the chrome plated case, cream colored dial, red chronograph second hand, and the grey stitched band just look really good together. The Venus 188 movement in this one is also a strong, accurate runner.

Back in the 1950s when Sears Roebuck sold pretty much everything, “everything” included luxury Swiss watches, and Orvin was their exclusive brand. I was particularly excited to open this one up, as I had never serviced a movement with a power reserve indicator and I was very curious how it worked. What I found was some very clever mechanical engineering able to track & differentiate the independent rotation of both the mainspring barrel and the winding arbor. Really cool stuff. The watch doesn’t look half bad either. I ended up overplating the case, and it turned out very nicely.

This handsome Omega must have led a pretty tough life, as the back side of the case had suffered a considerable amount of erosion, the plating was in poor shape, and the original crown was missing. I couldn’t do anything about the erosion of the case material, but with a service, new crown, case polish, crystal polish, and overplate in 18K gold, you still have a good running Omega that looks great on the wrist.

This lovely Genève really captures the understated elegance Omega perfected in the early 1970s, with a champagne silver sunburst dial framed by sharply faceted gold-plated markers that catch the light with every turn of the wrist. Beneath that beautiful dial beats Omega’s revered caliber 565, a 24-jewel automatic workhorse celebrated for its smooth winding action and quick-set date mechanism — one of the finest movements the company ever produced.

Back in the days when the big watch brands hadn’t really established a dedicated retail presence, it wasn’t uncommon for major watch boutiques like Turler to sell pieces with their name co-signed on the dial. The 562 automatic movement powering this example is a bit aesthetically compromised due to oxidation - probably from being worn while swimming - but it works very well and keeps great time. It’s an important watch for me, both because it was my first Omega restoration, and because it was the first watch where I was able to successfully straighten a damaged, bent hairspring - an important milestone in my watchmaking journey.

The prototypical mid-60s Omega dress watch. Simple and elegant. The small, manual-only 620 movement makes for a very thin watch. Not much more to say, other than the fact I feel lucky to have found this one in really excellent condition.

This Omega caught my attention when it showed up in a “parts & repair” auction listing due to its dramatic case shape and the bold indices on its dial. I was excited when I opened it up and found that the Omega 500 movement looked completely pristine, with none of the telltale signs of previous servicing. Following a thorough service, it now runs beautifully. Other than replacing the crystal, I left the exterior intact, scratches and all, as I didn’t think a re-plate or overplate on this watch would look right.

An Omega bumper automatic with a cool textured black dial. This watch definitely stands out on the wrist - so much so that you definitely need to think about what else you’re wearing when you strap it on. Like all bumper automatics, the winding action isn’t very efficient, but it makes for a lively companion on your wrist.